find products:
Auto Chip(IC)
CHIP IC inventory
Car Programmer
Diagnostic Tools
Mileage Correction
Key Programmer
Car Repair Tool
Car Maintenance
Car Repair Software
IC Adapters Seat
Electrolytic Capacitor
IHOOOH (Water) Factory Direct

Products You are here:Home → Products → Car Programmer

LabTool-48UXP USB Intelligent Universal Programmer
The LabTool-48UXP USB is a universal device programmer, which works through your PC's parallel port. It features a 48-pin universal pin driver and an expandable TTL pin driver. It supports over 5600 different devices (including memory, logic and single chip) that's over 11000 devices including different package forms in current software release, new chips are added to the support lists every few months.
It can Update by Web
Universal pin driver--True universal programming
The LabTool-48UXP features universal pin driver, each pin can supply four different voltage, ground, it also can be configurable as TTL high/low levels with pull-high/pull-low, high-speed clock and high impedance. This advanced pin design lets you program any DIL device of up to 48 pins without needing an adapter.
Unbeatable programming speed
The LabTool-48UXP's on-board intelligence reduces system overhead to a minimum. The LabTool-48UXP has 100% more performance then its predecessor product in program the high density flash chip, it can program a Intel 32 M bit flash chip in less then 60 seconds. 
Following is the programming speed example of labtool-48XP

Intel 28F320C3B
Blank check
 18.6 sec
 18.9 sec
 57.5 sec
 76.2 sec
 32.5 sec
 33.0 sec
 108.6 sec
 128.1 sec

 The LabTool-48XP is much faster than its competitors, making it much more productive with today's high density, multi-megabit memory devices.
Device insertion and contact checks--No mistakes!
The LabTool-48UXP performs device insertion and contact checks before it programs each device. It can detect poor pin contact and devices inserted upside down or in the wrong position. This function protects your pocketbook by preventing expensive chip damage due to opetor error.  
EPROM and Flash memory ID detection
Many EPROM and Flash memories have a build-in device ID and manufacturer ID. The LabTool-48UXP can read the device's ID by press hot key to detect the ID and compare its database and determined the chip抯 correct vendor and product number. This feature is especially useful with secondhand chips and devices that have had their part number accidentally (or intentionally) removed (this function only applied to 28 pin or 32 pin EPROM and Flash).
Auto-sensing and self-programming
To meet mass-production requirements the LabTool-48UXP has implemented new patented technology in both its hardware and software. After entering the Mass-production Mode, the production line operator inserts a device into the ZIF socket. An LED on the LabTool-48UXP indicates the device is ready and the operator simply removes it and replaces it with a new one. No formal training is necessary adding flexibility and saving time and money. In addition, the LabTool-48UXP's auto-sensing feature ensures the device has been inserted correctly and then automatically programs the device. Furthermore, in the mass-production mode the system keyboard is automatically disabled preventing the operator from making any inadvertent mistakes. 
Memory buffer auto Increment
If your memory devices need individual serial numbers, the LabTool-48 has an Auto Increment function, This simply increments the serial numbers in the buffer each time a new device is inserted. This saves time and money. The LabTool-48 has everything you need in one package: 48-pin driver, socket and complete device support library. You don't need to order separate device libraries.
User-selectable verify voltage, one- or two-pass verification
The LabTool-48XP lets you select the verify voltage after you have programmed the device, e.g., Vcc, Vcc ?%, Vcc ?0%. The Vcc voltage can be 2.0V to 6.5V. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.
Easy operation--Get to work immediately
The programming software's easy-to-use graphical interface eliminates your learning curve--you don't need the manual! Like MS-Windows, the software offers pop-up dialog boxes and on-line help. You can simply type the device vendor's name and part number. The software will select the proper driver automatically; you don't need to search one by one through long lists of devices.
Serialization function
If your memory devices need individual serial numbers with different increment sequence and initial value, the LabTool-48XP has an Auto Increment function. This simply increments the serial numbers in the buffer each time a new device is inserted. This saves time and money.
Project file save option
User can create and save a project file which contains device selection, buffer data and all the programming set-up options, this project file can be called upon at any time for future use without having to go through the setting up procedure again, your design file can easily pass to production department without making any mistake. 
3 Year warranty and software update via web
The LabTool-48UXP has additional safety features such as a built-in current limit and pin continuity check function. This prevents damage from faulty chips during the programming cycle. As a result we have provided a 3 year warranty on parts and labor for the LabTool-48UXP(limited 50,000-cycle warranty on ZIF socket). Free software updates
Universal 44-pin PLCC, QFP, PSOP and TQFP adapter supports 44-pin chips
The universal pin driver on the LabTool-48UXP enables you to support all 44-pin chips such as EPLD, EPROM, Flash, EPLD and Micro-controllers. You need only one 44-pin universal adapter which eliminates the need to buy multiple adapters and saves money. Moreover, different package devices within 48 pins will only require one adapter.
Low voltage chip support
The LabTool-48UXP support 2.0V ~ 5.0V logic level input/output, and it can supply 2.0V~21V analog voltage (such as VCC). Support lower then 2.7V low voltage chip such as 1.8V also possible by special low voltage adapter on top of its 48 pin ZIF socket
Home    About us    News    Products    Download    Service    Contact us
Copyright:obddo tech Co.,Ltd | | Network  ICP08122520